

Fire compartments
Fire-resistant rooms inside your building that keep a lithium-ion battery fire contained, designed and built for your project.
DESIGN & BUILD
What is a fire compartment for lithium-ion batteries?
A fire compartment is an enclosed space whose walls, roof, doors and penetrations resist fire for a set time. For lithium-ion batteries, it keeps a fire that starts inside, for example after thermal runaway, contained, so it does not spread to the rest of your building, your stock or neighbouring premises.
When is a fire compartment the right choice?
Batteries have to be stored or charged indoors and a container outside is not possible or practical.
The quantity of batteries is too large for safety cabinets or a single container.
Your authority or insurer requires separation between battery storage and the rest of the building.
You want to make part of an existing building suitable for batteries.
What we design and build
Fire compartmentation: fire-resistant walls, roofs, doors and penetrations, sized for your project.
Detection: early detection of CO, smoke and heat, connected to a fire alarm control panel.
Suppression: aerosol fire suppression, with sprinklers and fire water where required.
Alarm forwarding: 24/7 forwarding of alarms and faults.
Permits: basis of design, QRA where needed and consultation with the authority.
From design to commissioning
Assess: battery types, quantities, activities and the building are inventoried and tested against PGS 37-2.
Design: we set the protection level and work out the safety concept and the construction.
Build: we construct the compartment and install, connect and commission the technical systems.
Support: maintenance, 24/7 alarm forwarding, training and incident support.
Fire compartment or storage container?
For many sites, a Lithium Safety Container outside the building is the quickest route to compliant storage. A fire compartment is the better fit when batteries need to stay inside, when quantities are larger, or when storage has to be part of your logistics flow. We advise the option that fits your site.
Frequently asked questions
How long does a fire compartment have to resist fire?
That depends on your situation, the quantity of batteries and the requirements of your authority. We determine the required fire resistance in the safety concept.
Can you build a fire compartment in an existing building?
Yes. We can make part of an existing building suitable for lithium-ion batteries, including the fire-resistant construction, detection, suppression and penetrations.
Do you take care of the permit?
We prepare the basis of design, carry out a QRA where needed and consult with the authority, so your permit application is backed by a complete safety concept.
Can charging also take place in a fire compartment?
Yes, provided the measures are designed for it. Charging brings its own risks, which we take into account in the design.
Related services
Lithium battery warehouse: make a whole warehouse suitable for batteries
PGS 37-2 storage buildings: a complete building designed for batteries
Gap analysis: find out what your current situation is missing
Discuss your situation with a safety engineer
Tell us what you store or charge, how much and where. A safety engineer will look at your situation and advise on the next step. Contact us or call +31 85 130 64 05.
EXPERT ADVICE
Talk to a safety engineer
Tell us what you store or charge, how much and where. We will advise you on the next step.
The question is no longer whether you store lithium batteries, but how safely you do it.

One partner. From first assessment to long-term safety.
Lithium battery safety takes more than the right equipment. We bring practical experience, technical knowledge and ongoing support to every stage, from spotting the hazards to installing and maintaining the right solution.
Technical Expertise
We know lithium batteries, safety systems and the rules for storing and charging them inside out.
Practical Experience
Technical knowledge plus years on the shop floor. Our solutions are built for real sites, not just for drawings.
Safety First
Safety comes first in every decision, from product development and installation to service.
One Team, One Goal
Engineers, production staff and safety experts work side by side on every project.
HOW WE WORK
FROM FIRST QUESTION TO LONG-TERM SAFETY.
Every project starts with your batteries and your site, not with a product. We assess the risk, advise the protection level and measures, deliver and install, and stay involved afterwards.
01 · Assess
We inventory battery types, quantities, condition, activities and location, and test them against PGS 37-2 or PGS 37-1.
02 · Advise
We advise the protection level, size and measures and, where needed, calculate external safety risks with Safeti-NL.
03 · Realise
We build your container in-house or construct the compartment or building, then install, connect and commission it.
04 · Support
Maintenance with two inspections a year, 24/7 alarm forwarding, training and incident support, including quarantine.






