Lithium-ion battery storage, engineering and QRA

Designed and built in The Netherlands

More than 1,000 installations

EN

  • Lithium-ion battery storage, engineering and QRA

  • Designed and built in The Netherlands

Lithium-ion battery storage, engineering and QRA

Designed and built in The Netherlands

EN

Lithium-ion battery storage, engineering and QRA

Designed and built in The Netherlands

More than 1,000 installations

EN

Lithium-ion battery storage, engineering and QRA

Designed and built in The Netherlands

More than 1,000 installations

EN

Risk assessment & QRA

Understand the fire and external safety risks of your lithium-ion batteries, with a risk analysis and QRA calculations in Safeti-NL.

ADVICE & CALCULATION

What is a risk assessment for lithium-ion batteries?

A risk assessment identifies what can go wrong when you store, charge or use lithium-ion batteries, how likely it is and what the consequences would be for people, buildings and the surroundings. It is the basis for choosing the right safety measures, instead of guessing or over-investing.

Risk analysis and QRA

Depending on your situation, we carry out a risk analysis or a quantitative risk assessment (QRA). A QRA calculates the external safety risks of your battery storage or energy storage system for its surroundings. We carry out QRA calculations with Safeti-NL, the calculation software used for external safety in the Netherlands.

The risks we look at

  • Thermal runaway: a damaged, overcharged or overheated cell heats itself and releases flammable, toxic gases.

  • Fire spread: without separation, a battery fire can reach stock and buildings.

  • Damage and downtime: lost stock, damaged premises and production that stops.

  • Liability and insurance: as the operator, you remain responsible for safe storage, and insurers increasingly ask how batteries are stored and charged.

Our approach

  1. Assess: we inventory battery types, quantities, condition, activities and location.

  2. Analyse: we work out the relevant scenarios and, where required, calculate the external safety risks with Safeti-NL.

  3. Advise: we translate the outcome into concrete measures and a protection level that fits your site.

  4. Realise: if you wish, we also design, build and maintain the measures.

Frequently asked questions

When do I need a QRA?

A QRA is typically requested when the external safety risks of a location have to be quantified, for example for a permit application or an energy storage system. We can tell you whether it applies to your situation.

What is the difference between a risk assessment and a gap analysis?

A gap analysis compares your situation with the measures in PGS 37-2 or PGS 37-1. A risk assessment looks at what can actually go wrong and what the consequences are. The two are often combined.

Which software do you use for a QRA?

We calculate external safety risks with Safeti-NL.

Can you also implement the measures?

Yes. We design and build containers, fire compartments and complete storage buildings, and provide maintenance and 24/7 incident support.

Related services

Discuss your situation with a safety engineer

Tell us what you store or charge, how much and where. A safety engineer will look at your situation and advise on the next step. Contact us or call +31 85 130 64 05.

EXPERT ADVICE

Talk to a safety engineer

Tell us what you store or charge, how much and where. We will advise you on the next step.

The question is no longer whether you store lithium batteries, but how safely you do it.

One partner. From first assessment to long-term safety.

Lithium battery safety takes more than the right equipment. We bring practical experience, technical knowledge and ongoing support to every stage, from spotting the hazards to installing and maintaining the right solution.

Technical Expertise

We know lithium batteries, safety systems and the rules for storing and charging them inside out.

Practical Experience

Technical knowledge plus years on the shop floor. Our solutions are built for real sites, not just for drawings.

Safety First

Safety comes first in every decision, from product development and installation to service.

One Team, One Goal

Engineers, production staff and safety experts work side by side on every project.

HOW WE WORK

FROM FIRST QUESTION TO LONG-TERM SAFETY.

Every project starts with your batteries and your site, not with a product. We assess the risk, advise the protection level and measures, deliver and install, and stay involved afterwards.

01 · Assess

We inventory battery types, quantities, condition, activities and location, and test them against PGS 37-2 or PGS 37-1.

02 · Advise

We advise the protection level, size and measures and, where needed, calculate external safety risks with Safeti-NL.

03 · Realise

We build your container in-house or construct the compartment or building, then install, connect and commission it.

04 · Support

Maintenance with two inspections a year, 24/7 alarm forwarding, training and incident support, including quarantine.

EXPERT ADVICE. TAILORED TO YOU.

Not sure which solution fits your batteries?

Our engineers help you choose the storage or charging solution that fits your batteries and your permit.

Talk to a safety engineer

Advice from specialists in PGS 37, fire safety and QRA.

Tailored to your site

Battery type, quantity, condition and location decide the solution.

24/7 incident support

For emergencies, including large battery fires and quarantine.

EXPERT ADVICE. TAILORED TO YOU.

Not sure which solution fits your batteries?

Our engineers help you choose the storage or charging solution that fits your batteries and your permit.

Talk to a safety engineer

Advice from specialists in PGS 37, fire safety and QRA.

Tailored to your site

Battery type, quantity, condition and location decide the solution.

24/7 incident support

For emergencies, including large battery fires and quarantine.

EXPERT ADVICE. TAILORED TO YOU.

Not sure which solution fits your batteries?

Our engineers help you choose the storage or charging solution that fits your batteries and your permit.

Talk to a safety engineer

Advice from specialists in PGS 37, fire safety and QRA.

Tailored to your site

Battery type, quantity, condition and location decide the solution.

24/7 incident support

For emergencies, including large battery fires and quarantine.

EXPERT ADVICE. TAILORED TO YOU.

Not sure which solution fits your batteries?

Our engineers help you choose the storage or charging solution that fits your batteries and your permit.

Talk to a safety engineer

Advice from specialists in PGS 37, fire safety and QRA.

Tailored to your site

Battery type, quantity, condition and location decide the solution.

24/7 incident support

For emergencies, including large battery fires and quarantine.

EXPERT ADVICE. TAILORED TO YOU.

Not sure which solution fits your batteries?

Our engineers help you choose the storage or charging solution that fits your batteries and your permit.

Talk to a safety engineer

Advice from specialists in PGS 37, fire safety and QRA.

Tailored to your site

Battery type, quantity, condition and location decide the solution.

24/7 incident support

For emergencies, including large battery fires and quarantine.

Tested and classified

Standard: EN 1364-1 wall test. Premium 90: REI 90 classification.

Designed for PGS 37-2

All 21 storage models are designed for PGS 37-2 applications.

Built in-house

Designed and built by our own team in the Netherlands since 2019.

Accepted by insurers

Our containers are accepted by major Dutch insurers.

Tested and classified

Standard: EN 1364-1 wall test. Premium 90: REI 90 classification.

Designed for PGS 37-2

All 21 storage models are designed for PGS 37-2 applications.

Built in-house

Designed and built by our own team in the Netherlands since 2019.

Accepted by insurers

Our containers are accepted by major Dutch insurers.

Tested and classified

Standard: EN 1364-1 wall test. Premium 90: REI 90 classification.

Designed for PGS 37-2

All 21 storage models are designed for PGS 37-2 applications.

Built in-house

Designed and built by our own team in the Netherlands since 2019.

Accepted by insurers

Our containers are accepted by major Dutch insurers.

Tested and classified

Standard: EN 1364-1 wall test. Premium 90: REI 90 classification.

Designed for PGS 37-2

All 21 storage models are designed for PGS 37-2 applications.

Built in-house

Designed and built by our own team in the Netherlands since 2019.

Accepted by insurers

Our containers are accepted by major Dutch insurers.

Tested and classified

Standard: EN 1364-1 wall test. Premium 90: REI 90 classification.

Designed for PGS 37-2

All 21 storage models are designed for PGS 37-2 applications.

Built in-house

Designed and built by our own team in the Netherlands since 2019.

Accepted by insurers

Our containers are accepted by major Dutch insurers.

© 2026 Lithium Safety Containers B.V.

|

NOW FOLLOW US

© 2026 Lithium Safety Containers B.V.

|

NOW FOLLOW US

© 2026 Lithium Safety Containers B.V.

|

NOW FOLLOW US

© 2026 Lithium Safety Containers B.V.

|

NOW FOLLOW US

© 2026 Lithium Safety Containers B.V.

|

NOW FOLLOW US

EN